Meiji Techno TC5000 Series Manual de instrucciones descargar pdf (Pagina 6)

1.5 Product Safety Information- Handling the Microscope

This microscope is not intended to be used in the immediate vicinity of water

or a water outlet or placed in any location where water may penetrate the instrument. Water

penetration may result in electrical shock or death. Choose only a suitable environment for

your microscope.

Do not subject the microscope to extreme temperature fluctuations. Extreme temperature

changes may lead to condensation within the microscope which may result in damage to

the optical and electrical components.

Disassembly of the instrument may result in electrical shock, injury or death, equipment

damage, loss of warranty coverage or may create other potential hazardous consequences.

Always turn off the power switch and disconnect the cord from the power supply when

replacing fuses, connecting or disconnecting wiring, doing general maintenance or

replacing the microscope lamp.

DO NOT OPERATE UNLESS THE UNIT IS PROPERLY GROUNDED!

Use only the specified power cord in a well grounded socket. Do not use in an

ungrounded power receptacle or in cases where there is a break in the ground conductor

or damage to the electrical wiring.

Only fuses of the specified type and rating are to be used as replacements. Switch off the

power and disconnect the power cord before replacing fuses. Use of a non-compliant fuse

may result in electrical shock or severe damage your equipment.

The lamp and lamp house become extremely hot during and after operation. Do not place

any highly flammable or volatile material close to the lamp-house during or after

operation. Do not touch the lamp house or attempt to replace the bulb for at least 30

minutes after the unit has been turned off or injury may result.

Do not obstruct the air vents on the lamp-house or power supply. The lamp housing and

power supply should must be located at least 10 cm (4 inches) away from the wall or any

combustible objects.

Modifying the instrument in any way or unauthorized attempts to disassemble or use the

instrument for applications other then its intended design will automatically void the

warranty.

1 2 3 4 5 6 7 8 9 10 11 ... 41 42

Sin comentarios

Meiji Techno TC5000 Series Manual de instrucciones Pagina 6